Agitators for standard tanks

  • Anchor type agitators are principally designed to mix highly viscous products and non-Newtonian fluids, i.e., they lack a certain degree of viscosity because it depends on the temperature. These agitators can be mounted in tanks with rounded or conical bottoms.

 

  • Propeller type agitators can be used for suspension, dispersion and homogenization processes with low-viscosity products, where it is important to operate at medium and high speeds. These agitators can be mounted in tanks with rounded or conical bottoms. Propellers are axial flow agitators, ideal for solid-in-liquid solutions or suspensions because they prevent solid particles from depositing on the bottom of the tank. They can also be used for mixing liquids. Depending on the application, deflectors or flow deflector baffles can also be mounted in the tank. All propeller-type agitators can be accompanied by an anchor-type agitator.

 

  • Blade type agitators can be used in suspension, dispersion and homogenization processes with low- and medium-viscosity products. These agitators can be mounted in tanks with rounded or conical bottoms. They operate at a low-moderate mixing speed with a peripheral velocity of 2 to 7 m/s. Blades are axial flow agitators, ideal for solid-in-liquid solutions and suspensions because they prevent solid particles from depositing on the bottom of the tank. They can also be used for mixing liquids. Depending on the application, deflectors or flow deflector baffles can also be mounted in the tank.

 

  • Turbine type agitators can be used in emulsification and dispersion processes which require operation at very high speeds. They are efficient across a broad range of viscosities with a highly effective mixing capacity. These agitators can be mounted in tanks with rounded or conical bottoms. If the agitator is placed in the centre of the tank, depending on the type of product, the installation of a radial flow deflector could be necessary to ensure the best possible standards of mixing. This is not required if the agitator is off-centred. 

 

Click here for brochure

NBI / BCI / BMI / FMI / BFI / NHS

INOXPA ranges of Vertical agitators for a wide range of applications These agitators can be used in processes of mixing, dissolution, dispersion, and maintenance whenever agitation of product is required in the food processing, cosmetics, pharmaceutical or chemical industries.

 

Click here for BMI brochure

Click here for FMI brochure

Click here for BFI brochure

Click here for NBI brochure

Click here for NHS brochure

 

LR/LM

Bottom side entry agitators are used in process and storage tanks in the applications of the food-processing industry.  The main application is agitation of low viscosity products like wine, oil, milk, beer, alcohol, etc. in large volume tanks.

Click here for brochure

 

CPG

Side-entry agitator for the winemaking industry. Maintenance of solids in suspension. Coupage (wine blending). Gasification (SO2 or CO2). Temperature homogenisation.

Click here for brochure

 

PBC

The PBC series agitators are vertical direct motor-driven agitators with clamp. They can be used in processes of mixing, dissolution, dispersion, and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries. The agitators can be fitted to small tanks of up to 1,500 litres for work with low-viscosity products.

Click here for brochure

 

CXC

INOXPA offers a wide range of agitators designed for work in sealed tanks intended for some sterile processes of the pharmaceutical industry.  The agitators can be used under pressure, atmospheric pressure or vacuum. They can also be incorporated into fermenters. The most common applications are maintenance of plasma and cell cultures, preparation of various pharmaceutical formulations.

Click here for brochure

 

AGM

The range of INOXPA magnetic agitators presents a highly hygienic solution for the applications of dispersion, dissolution, homogenization and mixing of a wide range of media in the pharmaceutical industry. The agitators are especially useful in sterile processes; absence of mechanical seals prevents any contact with the exterior environment. The most common applications are dissolution of glucose in demineralised water, maintenance of vaccine suspensions homogeneity and agitation of blood fractions.

Click here for brochure

 

Make an enquiry

Product News

Pentair choose Heaps

Heap & Partners are delighted to announce their appointment as the UK Master Distributor…

Corrosive & abrasive duty

Designed and developed by our in-house engineering team,

Saunders EX Diaphragms

Saunders® EX Endurance Diaphragm features two-piece leaf-type construction.
Accreditations

Copyright Heap and Partners Ltd 2008-2017. All rights reserved.