Keystone GRW General Service Butterfly Valves

 

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.

Used on water, air, dry bulk conveying etc. These valves are for any service where a drop-tight shut-off with maximum flow area is required.

Available as manual lever operated valves or actuated valves to your specification, fully assembled, tested and certified at our factory.

  • Wafer and lugged body design with face-to-face dimension, according to EN 558 Series 20 and API 609.
  • Designed according to EN 593 and API 609.
  • The seat is field replaceable and fully isolates the body and shaft from the flow.
  • Primary shaft sealing exceeds the pressure rating of the valve and prevents leakage through shaft area to atmosphere.
  • A secondary shaft sealing provides back-up safety.
  • A molded-in O-ring in the seat for flange sealing eliminates the need for gaskets.
  • Shaft seals prevent moisture penetrating into the shaft area.
  • The two piece shaft allows for a thin disc and provides minimal obstruction to flow (up to DN 300).
  • Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life and drop-tight shut-off.
  • Body locating holes allow ease of installation and centering between the flanges.
  • Extended body neck allows for pipe insulation.
  • Actuator flange according to ISO 5211.
  • Top and bottom shaft bearings for optimized support and minimum friction and decreased torque.
  • Top bushing absorbs actuator side thrust loads.
  • All valves comply to Pressure Equipment Directive (2014/68/EU) Module B + D, CE Marking.
  • Available approvals: NSF/ANSI 61, ACS, KIWA, WRAS, DVGW-G, ABS, CU-TR.

Sizes: 20mm – 900mm
Pressure: 16 bar (20mm – 300mm), 10 bar (350mm – 900mm)
Reinforced seat: 16 bar (350mm – 600mm)
End of line: 10 bar (20mm – 300mm), 6 bar (350mm – 900mm)
Reinforced seat: 10 bar (350mm – 600mm)>
Vacuum service: 0.4 bar
Temperature: -28°C to +160°C
Flange accommodation: PN 6/10/16, ASME 125/150, JIS 10K, JIS 16K, BS Table E, AS4087 PN 16, AS2129 Table E

Click here for more information.

 

 

Centerline RS General Service Butterfly Valves

A resilient seated butterfly valve with superior design features and materials of construction to provide repeatable tight shutoff in severe abrasive and corrosive environments for a variety of applications.

Click here for more information.

T-Series - PTFE Sealed Firesafe Valve

  • Firesafe and non-Firesafe: Certified Firesafe to BS 6755 part 2 and BS EN ISO 10497.
  • Sizes: 3” (80mm) to 48” (1200mm)
  • Body styles: Double Flanged, Wafer Lugged, Wafer Flangeless
  • Geometry: Double offset giving low unseating and seating torques electroless nickel plated spherical blade periphery is an option.
  • Pressure ratings: ANSI 150#, 300#. PN 10, PN 16, PN 25. Others on request
  • Materials - Carbon Steel (ASTM A216 WCB), Stainless Steel (ASTM A351 CF8M), Duplex & Super Duplex stainless steels, 6Mo stainless steel, Aluminum Bronze, Monel,  Incoloy, Inconel, Hastelloy B&C, Titanium

The shaft is of one piece construction with an anti-blowout feature on the non-drive side and a reduced diameter at the actuator end. If failure of the shaft -to -disc connection, or internal failure of the shaft occurs due to excessive torque, no portion of the shaft can be ejected from the valve as result of internal pressure.

Click here for brochure.

 

 

Make an enquiry

Make an enquiry

Product News

Phase Range of Sprung Disc Check Valves

Heap & Partners Phase Check Valves have been specially designed to cover all of customer…

The Saunders IDV eXtreme Range

The Saunders IDV diaphragms are changing and will be known as the eXtreme range. The…

Corrosive & abrasive duty

Designed and developed by our in-house engineering team,
Accreditations

Copyright Heap and Partners Ltd 2008-2017. All rights reserved.