Saunders NX Check Valve is the check valve of choice; a full bore non-return valve capable of handling corrosive media and slurries

Saunders NX check valves consist of a body, seat and a rubber disc. the disc acts as a sealing flap allowing flow in one direction only. The action of the fluid flowing in one direction will push the disc away from the seat, but flow (with a pressure>0.35 bar for water or  >0.7 bar for air) in the opposite direction will press the disc against the seat, preventing fluid flow in that direction.

The NX valve utilises the body/set fastenings to directly secure the disc. The mating flanges of the body and the seat are therefore flat faced.

Avaliable in sizes 25mm - 150mm (Excluding 32mm and 125mm)

Materials: Cast Iron and SG Iron / Hard rubber lined in a range of multiple flanges to BS EN 12334

Disc material in Butyl - A great solution for diluted acids and alkalis, drinkking water and abrasive applications like phosphoric acid in low concentration

Disc material in FKM - Specially recommended for applications involving gases at high temperature, concentrated acids, aromatic solvents, low concentrate chlorine solutions, ozone and unleaded petroleum


Make an enquiry

Make an enquiry

Product News

Phase Range of Sprung Disc Check Valves

Heap & Partners Phase Check Valves have been specially designed to cover all of customer…

The Saunders IDV eXtreme Range

The Saunders IDV diaphragms are changing and will be known as the eXtreme range. The…

Corrosive & abrasive duty

Designed and developed by our in-house engineering team,

Copyright Heap and Partners Ltd 2008-2017. All rights reserved.