Heap & Partners
Download our company brochure
  • Home
  • Products by Brand
    • Balston
    • Baumann
    • Centerline RS
    • Crane
    • Daume
    • Elomatic
    • Fisher
    • Flowseal
    • Farris
    • Fike
    • Heaps
    • Hindle
    • Hytork
    • K-Controls
    • Keystone
    • Kinetrol
    • KTM
    • K-Tork
    • Lucifer
    • Parker
    • Phase
    • Phonix
    • Plenty
    • Premiair
    • Revo
    • Saunders
    • Solent & Pratt
    • Strack
    • Tescom
    • Topworx
  • Products by Type
        • Actuators & AccessoriesAn actuator is a component of a machine that is responsible for moving or controlling a mechanism or system. It requires a control signal and a source of energy. The control signal is relatively low energy and may be electric voltage or current, pneumatic or hydraulic pressure. The supplied main energy source may be electric current, hydraulic fluid pressure, or pneumatic pressure. When the control signal is received, the actuator responds by converting the energy into mechanical motion.
          • 1/4 Turn Vane Actuators
          • 1/4 Turn Rack & Pinion Actuators
          • Digital Valve Controllers
          • Linear Actuators
          • Mounting Kits & Spindle Extensions
          • Solenoid Valves
          • Switch Boxes
        • Ball ValvesA ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status. Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and globe valves.
          • Floating Ball Valves
          • Trunnion Ball Valves
        • Butterfly ValvesA butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favoured because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the centre of the pipe; passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, so a pressure drop is always induced in the flow, regardless of valve position.
          • General Service Butterfly Valves
          • High Performance Double Offset Butterfly Valve
          • High Performance Triple Offset Butterfly Valve
        • Control Valves & RegulatorsA control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller. This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level. Pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.
          • Control Valves
          • Corrosive Control Service Valves
          • Regulators
          • Tank Management Technologies
        • Diaphragm ValvesDiaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal. There are two main categories of diaphragm valves: The A Type seals over a “weir” (saddle) and the KB Type (sometimes called a “full bore or straight-way” valve) seals over a seat. The A Type (Weir) is the most common in process applications and the KB Type is more commonly used in slurry applications to reduce blocking issues but exists also as a process valve. Diaphragm valves can be manual or automated. Their application is generally as shut-off valves in process systems within the industrial, food and beverage, pharmaceutical and biotech industries.
          • Hygienic/Aseptic Diaphragms
          • Industrial Diaphragm Range
          • Diaphragm Valve Spares
        • Check ValvesCheck Valve – A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. Gate Valve – A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired Globe Valve – A Globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve. The plug is also called a disc or disk. In globe valves, the plug is connected to a stem which is operated by screw…
          • Lined Check Valves
          • Piston / Lift Check ValvesCheck valves are self-automated valves that allow the flow of gases and liquids to move one way, preventing any reverse or backward flow of material inside a pipeline. Its versatile nature allows them to be installed vertically or horizontally, without human interaction, and reliant on the flow to open and close. The internal disc inside the check valve allows the flow to pass forward, which opens the valve. Then, dependent on its design, the disc starts to close the valve as the forwarding flow decreases or reverses
          • Swing Check ValvesMounted with a disc that swings on a hinge or shaft, the disc swings off the seat to allow forward flow; when the flow stops, the disc swings back to the seat to block flow moving in reverse. Swing check valves need to be cleaned, so they aren’t entirely maintenance-free -, so it’s crucial to install them in a convenient place to be inspected.
          • Wafer Check Valves
        • Lined ValvesWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today. =
          • Lined Ball Valves
          • Lined Butterfly Valves
          • Check
          • Lined Diaphragm Valves
        • Safety Relief ValvesA safety valve is a valve that acts as a fail-safe in a thermal-hydraulics plant. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds pre-set limits. Pilot-operated relief valves are a specialized type of pressure safety valve. Safety valves were first developed for use on steam boilers during the Industrial Revolution. Early boilers operating without them were prone to explosion.
          • Process Safety Valves
          • Speciality Safety Valves
          • Steam Safety Valves
          • Rupture DiscsRupture Discs For Pressure Relief Overpressure can result in devastating events, which is why Fike rupture discs have been trusted for more than 75 years to “burst” precisely when called upon to relieve pressure and protect workers and businesses from a potential disaster. Fike offers numerous types of rupture discs to ensure the most reliable pressure relief solution in every application: vapor or liquid media, high or low pressures, hygienic requirements, and more.
        • InstrumentationWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today.
          • Analytical Instruments
          • Control Panels
          • Filtration Instruments
          • Nitrogen generators
          • Distribution Manifolds
          • Tubing, Valves & Fittings
        • OtherWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today.
          • Condensate Return Sets
          • Gate ValvesGate valves are useful for fully open and fully closed service functions. Ideal for installation in pipelines as isolation components, the valve opens when lifting a gate out of the pathway of the fluid and closes when the gate returns to its position. Compact in design, gate valves require little space along the pipe axis and don’t restrict the flow when the gate is opened fully. They are also known as multi-turn valves and operate either clockwise to close or clockwise to open the rotating motion of the threaded stem.
          • Globe ValvesA globe valve can stop, start and regulate flow in a pipeline. The valve is shaped like a sphere and includes a stem that moves up and down, a disc, and a seat. It works by the disc lowering or raising through the valve stem. When the disc lowers, the flow pattern shuts off; if the disc increases to maximum, the flow runs at maximum too. If the disc raises to less than maximum, the flow regulates in proportion to the vertical disc position. The flow inside a globe valve changes in direction, causing greater resistance and high pressure to drop FEATURES & BENEFITS: – Easy maintenance and repair – Good shutoff capability – Shorter stem travel – Available in a variety of patterns – Good throttling capability – It can be used as a stop check valve
          • Strainers
  • News
  • About Us
    • Our Company
    • Manufacturing
    • 3 Ps – Minimising our impact.
    • Training
    • Our Environment
    • Helping Others
    • Schools
    • Terms and Conditions
    • Net Zero
  • Contact
  • WebShop
    • Air Headers / Manifolds
    • Ball Valves
    • Butterfly Valves
    • Check Valves
    • Diaphragm Valves
    • Digital Valve Controllers
    • Instrumentation Fittings
    • Pressure Safety Valves
    • Regulators
icon
Have any questions?
Call: 0151 488 7222
Email: info@heaps.co.uk
Heap & Partners
  • Home
  • Products by Brand
    • Balston
    • Baumann
    • Centerline RS
    • Crane
    • Daume
    • Elomatic
    • Fisher
    • Flowseal
    • Farris
    • Fike
    • Heaps
    • Hindle
    • Hytork
    • K-Controls
    • Keystone
    • Kinetrol
    • KTM
    • K-Tork
    • Lucifer
    • Parker
    • Phase
    • Phonix
    • Plenty
    • Premiair
    • Revo
    • Saunders
    • Solent & Pratt
    • Strack
    • Tescom
    • Topworx
  • Products by Type
        • Actuators & AccessoriesAn actuator is a component of a machine that is responsible for moving or controlling a mechanism or system. It requires a control signal and a source of energy. The control signal is relatively low energy and may be electric voltage or current, pneumatic or hydraulic pressure. The supplied main energy source may be electric current, hydraulic fluid pressure, or pneumatic pressure. When the control signal is received, the actuator responds by converting the energy into mechanical motion.
          • 1/4 Turn Vane Actuators
          • 1/4 Turn Rack & Pinion Actuators
          • Digital Valve Controllers
          • Linear Actuators
          • Mounting Kits & Spindle Extensions
          • Solenoid Valves
          • Switch Boxes
        • Ball ValvesA ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status. Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and globe valves.
          • Floating Ball Valves
          • Trunnion Ball Valves
        • Butterfly ValvesA butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favoured because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the centre of the pipe; passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, so a pressure drop is always induced in the flow, regardless of valve position.
          • General Service Butterfly Valves
          • High Performance Double Offset Butterfly Valve
          • High Performance Triple Offset Butterfly Valve
        • Control Valves & RegulatorsA control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller. This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level. Pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.
          • Control Valves
          • Corrosive Control Service Valves
          • Regulators
          • Tank Management Technologies
        • Diaphragm ValvesDiaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal. There are two main categories of diaphragm valves: The A Type seals over a “weir” (saddle) and the KB Type (sometimes called a “full bore or straight-way” valve) seals over a seat. The A Type (Weir) is the most common in process applications and the KB Type is more commonly used in slurry applications to reduce blocking issues but exists also as a process valve. Diaphragm valves can be manual or automated. Their application is generally as shut-off valves in process systems within the industrial, food and beverage, pharmaceutical and biotech industries.
          • Hygienic/Aseptic Diaphragms
          • Industrial Diaphragm Range
          • Diaphragm Valve Spares
        • Check ValvesCheck Valve – A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. Gate Valve – A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired Globe Valve – A Globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve. The plug is also called a disc or disk. In globe valves, the plug is connected to a stem which is operated by screw…
          • Lined Check Valves
          • Piston / Lift Check ValvesCheck valves are self-automated valves that allow the flow of gases and liquids to move one way, preventing any reverse or backward flow of material inside a pipeline. Its versatile nature allows them to be installed vertically or horizontally, without human interaction, and reliant on the flow to open and close. The internal disc inside the check valve allows the flow to pass forward, which opens the valve. Then, dependent on its design, the disc starts to close the valve as the forwarding flow decreases or reverses
          • Swing Check ValvesMounted with a disc that swings on a hinge or shaft, the disc swings off the seat to allow forward flow; when the flow stops, the disc swings back to the seat to block flow moving in reverse. Swing check valves need to be cleaned, so they aren’t entirely maintenance-free -, so it’s crucial to install them in a convenient place to be inspected.
          • Wafer Check Valves
        • Lined ValvesWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today. =
          • Lined Ball Valves
          • Lined Butterfly Valves
          • Check
          • Lined Diaphragm Valves
        • Safety Relief ValvesA safety valve is a valve that acts as a fail-safe in a thermal-hydraulics plant. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds pre-set limits. Pilot-operated relief valves are a specialized type of pressure safety valve. Safety valves were first developed for use on steam boilers during the Industrial Revolution. Early boilers operating without them were prone to explosion.
          • Process Safety Valves
          • Speciality Safety Valves
          • Steam Safety Valves
          • Rupture DiscsRupture Discs For Pressure Relief Overpressure can result in devastating events, which is why Fike rupture discs have been trusted for more than 75 years to “burst” precisely when called upon to relieve pressure and protect workers and businesses from a potential disaster. Fike offers numerous types of rupture discs to ensure the most reliable pressure relief solution in every application: vapor or liquid media, high or low pressures, hygienic requirements, and more.
        • InstrumentationWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today.
          • Analytical Instruments
          • Control Panels
          • Filtration Instruments
          • Nitrogen generators
          • Distribution Manifolds
          • Tubing, Valves & Fittings
        • OtherWe were founded in 1866 by William Heap as an engineering supply company. Today we operate from three offices around the United Kingdom in Liverpool, London and Teesside supplying some of the best process and instrumentation valves and ancillary equipment available on the market today.
          • Condensate Return Sets
          • Gate ValvesGate valves are useful for fully open and fully closed service functions. Ideal for installation in pipelines as isolation components, the valve opens when lifting a gate out of the pathway of the fluid and closes when the gate returns to its position. Compact in design, gate valves require little space along the pipe axis and don’t restrict the flow when the gate is opened fully. They are also known as multi-turn valves and operate either clockwise to close or clockwise to open the rotating motion of the threaded stem.
          • Globe ValvesA globe valve can stop, start and regulate flow in a pipeline. The valve is shaped like a sphere and includes a stem that moves up and down, a disc, and a seat. It works by the disc lowering or raising through the valve stem. When the disc lowers, the flow pattern shuts off; if the disc increases to maximum, the flow runs at maximum too. If the disc raises to less than maximum, the flow regulates in proportion to the vertical disc position. The flow inside a globe valve changes in direction, causing greater resistance and high pressure to drop FEATURES & BENEFITS: – Easy maintenance and repair – Good shutoff capability – Shorter stem travel – Available in a variety of patterns – Good throttling capability – It can be used as a stop check valve
          • Strainers
  • News
  • About Us
    • Our Company
    • Manufacturing
    • 3 Ps – Minimising our impact.
    • Training
    • Our Environment
    • Helping Others
    • Schools
    • Terms and Conditions
    • Net Zero
  • Contact
  • WebShop
    • Air Headers / Manifolds
    • Ball Valves
    • Butterfly Valves
    • Check Valves
    • Diaphragm Valves
    • Digital Valve Controllers
    • Instrumentation Fittings
    • Pressure Safety Valves
    • Regulators
icon
Have any questions?
Call: 0151 488 7222
Email: info@heaps.co.uk

16 search results for "Saunders Diaphragm Valve"

1
Saunders Diaphragm Valve: Process Control and Fluid Handling

Saunders Diaphragm Valve: Process Control and Fluid Handling

June 18, 2024
2
Saunders Diaphragm Valve: Process Control and Fluid Handling

Saunders Diaphragm Valve: Process Control and Fluid Handling

January 9, 2024
3
Saunders® Industrial Diaphragm Valves – Unlined / Alloy

Saunders® Industrial Diaphragm Valves – Unlined / Alloy
4
Saunders® Industrial Diaphragm Valves – Rubber Lined

Saunders® Industrial Diaphragm Valves – Rubber Lined
5
Saunders® Industrial Diaphragm Valves – Plastic-Lined

Saunders® Industrial Diaphragm Valves – Plastic-Lined
6
Saunders® Industrial Diaphragm Valves – Glass Lined

Saunders® Industrial Diaphragm Valves – Glass Lined
7
Saunders® Industrial Diaphragm Valves

Saunders® Industrial Diaphragm Valves
8
Phase Diaphragm Valve LC Actuator

Phase Diaphragm Valve LC Actuator
9
Phase Diaphragm Valve LCSB Switchbox

Phase Diaphragm Valve LCSB Switchbox
1 2 Next Page
  • Company
    • Blog
  • Support
    • Forum Support
    • Cookies Policy
    • Privacy Policy
  • Our Products
    • Actuators & Accessories
    • Ball Valves
    • Butterfly Valves
    • Check Valves
    • Control Valves & Regulators
  • Our Products
    • Diaphragm Valves
    • Instrumentation
    • Lined Valves
    • Safety Relief Valves
    • Other
  • About Us
    • Our Company
    • Manufacturing
    • 3 Ps
    • Training
    • Our Environment
    • Helping Others
    • Schools
  • Links
    • Contact Us
    • Terms & Conditions
    • Privacy Policy
    • Articles

Head office

Canada Works
Corporation Road
Birkenhead
Wirral
CH41 8FA

Tel: 44 (0) 151 488 7222
Fax: 44 (0) 151 488 7223

London office

Suite 2
Banters House
Banters Lane Business Park
Great Leighs Chelmsford Essex
CM3 1QX

Tel: 44(0) 1245 363 070
Fax: 44 (0) 1245 361 804

Teesside office

Office G3,
Fusion Hive,
North Shore Road,
Stockton-on-Tees,
TS18 2NB

Tel: 44 (0) 1642 750 606
Fax: 44 (0) 1642 750 606

Ireland Office

Office 11, 104 at Ebrington Square
104 Hill Avenue
Ebrington Square
Derry
BT47 6HF

Tel: 028 71 164205

Copyright © Heap and Partners Ltd 2008-2021. All rights reserved.
  • Home
  • Products by Brand
    • Balston
    • Baumann
    • Centerline RS
    • Crane
    • Daume
    • Elomatic
    • Fisher
    • Flowseal
    • Farris
    • Fike
    • Heaps
    • Hindle
    • Hytork
    • K-Controls
    • Keystone
    • Kinetrol
    • KTM
    • K-Tork
    • Lucifer
    • Parker
    • Phase
    • Phonix
    • Plenty
    • Premiair
    • Revo
    • Saunders
    • Solent & Pratt
    • Strack
    • Tescom
    • Topworx
  • Products by Type
    • Actuators & Accessories
      • 1/4 Turn Vane Actuators
      • 1/4 Turn Rack & Pinion Actuators
      • Digital Valve Controllers
      • Linear Actuators
      • Mounting Kits & Spindle Extensions
      • Solenoid Valves
      • Switch Boxes
    • Ball Valves
      • Floating Ball Valves
      • Trunnion Ball Valves
    • Butterfly Valves
      • General Service Butterfly Valves
      • High Performance Double Offset Butterfly Valve
      • High Performance Triple Offset Butterfly Valve
    • Check Valves
      • Lined Check Valves
      • Piston / Lift Check Valves
      • Swing Check Valves
      • Wafer Check Valves
    • Control Valves & Regulators
      • Control Valves
      • Corrosive Control Service Valves
      • Regulators
      • Tank Management Technologies
    • Diaphragm Valves
      • Hygienic/Aseptic Diaphragms
      • Industrial Diaphragm Range
      • Diaphragm Valve Spares
    • Instrumentation
      • Analytical Instruments
      • Control Panels
      • Filtration Instruments
      • Nitrogen generators
      • Distribution Manifolds
      • Tubing, Valves & Fittings
    • Lined Valves
      • Lined Ball Valves
      • Lined Butterfly Valves
      • Check
      • Lined Diaphragm Valves
    • Other
      • Condensate Return Sets
      • Gate Valves
      • Globe Valves
      • Strainers
    • Safety Relief Valves
      • Process Safety Valves
      • Speciality Safety Valves
      • Steam Safety Valves
      • Rupture Discs
  • News
  • About Us
    • Our Company
    • Manufacturing
    • 3 Ps – Minimising our impact.
    • Training
    • Our Environment
    • Helping Others
    • Schools
    • Terms and Conditions
    • Net Zero
  • Contact
  • WebShop
    • Air Headers / Manifolds
    • Ball Valves
    • Butterfly Valves
    • Check Valves
    • Diaphragm Valves
    • Digital Valve Controllers
    • Instrumentation Fittings
    • Pressure Safety Valves
    • Regulators